CREALITY / How-to & tips
Decide what you need to keep before exporting a model. A working setup, a geometry file and a handover for the next person serve different purposes. A familiar filename extension does not show that every choice made while preparing the job travelled with it.
This is a digital-workflow guide for HALOT-X1 and the linked HALOT BOX documentation. It contains no resin-handling, support-design, exposure, curing or machine-service procedure. The retention and handover checklist is our editorial advice, not an invented software save sequence.
Featured image: Creality AU listing image: HALOT-X1 with a pictured AFU accessory; check its inclusion separately; check the selected package.
1. Understand the documented STL boundary
The HALOT-X1 software FAQ says that its described STL export does not include resin or support settings. Support shapes become part of the exported geometry, rather than remaining editable support settings. That is a limitation of this handover, not a claim that an STL mesh can never be edited in another application.
Before choosing an export, ask what the next task requires. If someone needs to revisit preparation choices, do not assume that sending geometry alone meets that need. Keep the difference visible in the handover note.
2. Retain the working context
Our suggested record includes the object revision, software version, intended printer and the names of the profiles or choices used. Retain a recoverable working copy using the functions documented for your installed software; this guide does not invent a project extension or a particular Save menu.
Name the geometry export so that it can be distinguished from the working material. Avoid overwriting the only useful starting point while testing an export. A clear separation is especially helpful when a colleague returns with a change request days later.
| Keep separate | Purpose of the check |
|---|---|
| Working setup | Can preparation choices be revisited? |
| Geometry export | Is this the intended model and revision? |
| Handover note | What must the recipient do next? |
3. Check the received result, not just the export message
Open a delivered geometry file in the intended receiving application and check the object identity, orientation and visible contents. If the recipient instead needs the working setup, agree on an appropriate documented handover rather than renaming an STL to make it look like a project.
Keep a note of what was supplied and what was checked. A successful transfer confirms that data moved; it does not prove that preparation settings were retained or that a job is ready to run on a printer.
4. Keep software faults separate from file-choice questions
The X1 FAQ also asks for slicer and firmware versions when investigating compatibility problems. Record the versions involved if an export or job fails, but do not turn this file-handover checklist into a firmware-update procedure.
For support, describe the exact action, the file's purpose and the result you observed. Preserve the starting material so that a proposed fix can be checked against the same case rather than an unrelated replacement file.
Build your CREALITY workflow with Creality AU
See HALOT-X1 and its exact owner resources. Keep this digital workflow separate from operating, chemical-processing and service instructions.
View product and package optionsTechnical references
Product photographs are from Creality AU product listings and identify the pictured hardware. Follow the linked Creality instructions for your exact model and installed software or firmware.